Safety is one of the highest priorities when dividing a large room into individual work areas. PL Systems Inc. curtains use a Modacrylic material as a major percentage of the curtain content. In addition to Modacrylic Self Extinguishing Fabric, SEF, (38%), our curtains contain Saran Flat Monofilament, (30%) for curtain strength, Viscose Rayon (26%) for softness and Polyester (6%) to prevent wrinkles. The back side of the curtain made of vinyl to prevent light penetration.
The properties of this material lend itself as an ideal product to be used in many Laboratories such as Laser Labs Class I-IV Darkroom/Blackout applications, Infra-Red, Ultra-Violet Measurement, Gene Separation Silver Halide and many others.
Single Blackout Curtain and Track Assembly Specifications
Single Blackout Curtain and Track Assembly Specifications
Catalog No’s. DCT
The black-out curtain material is inherently & permanently flame resistant and is composed of 38% Modacrylic (SEF) Self Extinguishing Fabric, 30% Saran Flat Monofilament, 26% Viscose Rayon and 6% Polyester. The material also has a double-vinyl Black color laminated back for opacity weight 24 ounces per linear yard (samples are available upon request). This fabric passes the flame resistance requirements specified by the State of California test – Registration # FA-40602, and in accordance with the National Fire Protection Association Standard No. 701-99 test methods 1 and 2 Self Extinguishing and Provide Test Report based on ASTM E 84.
Double-coated Vinyl cloth will not be acceptable as an equal.
Curtain is custom designed to the width of the opening permitting movement of curtains in either direction of the track. The outside vertical edges of each curtain are supplied with “Velcro” quick seal strips to facilitate “light-trap” overlaps for easy attachment to walls. The curtain panel shall be sewn flat plus 10% fullness. The seams shall be sewn French-style (No raw edges visible). The top of the curtain shall have grommets on 8″ centers. The bottom edge shall be weighted and overlap with floor approximately 2”.
Valences Each curtain section is supplied with front and rear light-trap valance. Valences are configured one on the outside of the track and one on the inside of the track height 11 inches. The valance shall be made of the same blackout curtain material, with a sewn-on Velcro strip, and shall be mounted to the curtain track assembly using Velcro supplied with track.
Track The track is constructed of satin anodized aluminum designed for surface mounting, and to the underside of the ceiling. The track is extruded aluminum box-channel 1-1/4″ x 7/8″ slotted on the underside to receive two-wheeled carriers. The track also serves as an integral part of the valance assembly. Fastening should be made not more than 18″ on centers. Corners, where required, are supplied as one piece, 12″ radius 90-degree track sections. Tracks are supplied, as required, with hook carriers, end caps, snap-outs, and connectors, of the sleeve type. The hooks are formed of rustproof wire riding in a carrier with non-wearing nylon wheels.
Installation fastenings, bracing and grounds are not supplied and are the responsibility of the customer. Grounds to support 50 lbs. per linear foot.
Curtain Warranty PL Systems Inc. warrants to the original purchaser that all curtain materialshall be free of defects in workmanship and material for Five (5) years from date of installation and acceptance
Curtains are Black on both sides
Specifications by PL Systems Inc. Great Neck NY 11024
800-422-0101 www.plsys.net
Single Blackout 1-18
DOUBLE Blackout Curtain and Track Assembly Specifications
Double Blackout Curtain and Track Assembly Specifications
Catalog No’s. DCTD
The black-out curtain material is inherently & permanently flame resistant and is composed of 38% Modacrylic (SEF) Self Extinguishing Fabric, 30% Saran Flat Monofilament, 26% Viscose Rayon and 6% Polyester. The material also has a double-vinyl Black color laminated back for opacity weight 24 ounces per linear yard (samples are available upon request). This fabric passes the flame retardant requirements specified by the State of California test – Registration # FA-40602, and in accordance with the National Fire Protection Association Standard No. 701-99 test methods 1 and 2 Self Extinguishing.
Double-coated Vinyl cloth will not be acceptable as an equal.
CURTAINS Double Curtains run as two pieces with an overlap of two feet at the separation point, (Entrance/Exit) permitting movement of curtains in either direction of the track. This maintains a light tight condition at the overlap opening. Both tracks run side-by-side or as close to the radius (if applicable) as possible. The outside vertical edges of each curtain are supplied with “Velcro” quick seal strips to facilitate overlaps for easy light-tight attachment to walls. The curtain panel shall be sewn flat with 10% fullness. The seams shall be sewn French-style (No raw edges visible). The top of the curtain shall have grommets on 8″ centers. The bottom edge shall be weighted and overlap with floor approximately 2”.
Valences Each curtain section is supplied with front and rear light-trap valance. Valences are configured one on the outside of the track and one on the inside of the track height 11 inches. The valance shall be made of the same blackout curtain material, with a sewn-on Velcro strip, and shall be mounted to the curtain track assembly using Velcro supplied with track.
Track The Double Track is constructed of satin anodized aluminum designed for surface mounting, and to the underside of the ceiling. The track is extruded aluminum box-channel 1-1/4″ x 7/8″ slotted on the underside to receive two-wheeled carriers. The track also serves as an integral part of the valance assembly. Fastening should be made not more than 18″ on centers. Corners, where required, are supplied as one piece, 12″ radius 90-degree track sections. Tracks are supplied, as required, with hook carriers, end caps, snap-outs, and connectors, of the sleeve type. The hooks are formed of rustproof wire riding in a carrier with non-wearing nylon wheels.
Installation fastenings, bracing and grounds are not supplied and are the responsibility of the customer. Grounds to support 50 lbs. per linear foot.
Curtain Warranty PL Systems Inc. warrants to the original purchaser that all curtain materialshall be free of defects in workmanship and material for Five (5) years from date of installation and acceptance
Curtains are Black on both sides
Specifications by PL Systems Inc. Great Neck NY 11024 –
